Attention should be paid to the selected wall paint Daubs parts of selected functions according to LaTeX

We buy wall paint when not too rigid, such as resistance to scratch, there is no need for excessive, because there is no much practical significance. It should focus on the actual performance of paint.

Now people on latex paint, no longer confined to the decorative and functional importance, so when selects and purchases, latex paint features is very important, according to different parts of the brushing selection of latex paint. If the bedroom and the living room wall using latex paint requires strong adhesion, texture and delicate, differentiated and good air permeability; kitchen, the bathroom paint should be waterproof, anti-mildew, easy wash performance.

Low quality latex paint not only affects the construction quality that contains unqualified raw chemical materials also endanger human health, should try to shop or dealer store to purchase. Purchase detailed check products and packaging, appearance and quality.

◇ The open door, truly environmentally friendly water emulsion paint should be non-toxic odorless, users in the smell and taste is if there are latex paint pungent smell or industrial flavor and taste, is not the ideal choice.

¡Ó over time, original paint surfaces will form a very thick resilient oxide film, not easy to crack, but inferior only to form a layer of film is very thin, fragile, with pungent smell.

Mix with a wooden stick to latex paint, then stick to pick up high-quality latex paint is poured into a fan-shaped.

Finger touch, the original latex paint should feel smooth, and smooth.

Latex paint Daubs into the wall, use a damp cloth, original color luminous like new, while the inferior due to condensation and poor resistance to water, gently sweep, they will fade.

When the purchase should take a look at the ingredients, the quality of the components of coatings should be copolymer resins or painted acrylic resin.

Don't forget to look at the product's shelf life.

L

atex paint while having easy, strong, rich colors, high resistance to cleaning, environmental protection, and so many advantages, but it also has some quality problems, bad treatment can affect the quality of the decoration.

Wall flowers, color is not uniform

Mainly because the base color, not to be processed. This situation must be brush again be overwritten primer. Also, pay attention to when choosing materials selected from the same manufacturer, the same species and the same lot number, otherwise the chromatic aberration.

Surface roughness

The main reason is the primary processing not clean, brush with sand, dirt or operating environment untidy. First primary processing clean, clean the Brush tool, and the environment do dust. The main reason is since skin too smooth grass roots or oil. Grass too light available steel brush to brush and grass roots process clean, oil decontamination by solvent do.

Wall cracks

This phenomenon is most common, concrete reasons to separate. If you are the GRC, seams carefully do crack treatment, generally with glasscloth or kraft paper, partition Board itself features prone to small crack, so the family decoration in order to ensure as few appeared full plaster cracking phenomenon best again glasscloth or doubao cloth, such as a sand grey wall PuTTY needs to eradicate, preferably in the PuTTY stick plasterboard after eradication or elimination of the sand ash to grass-roots; as a load-bearing walls or walls, cracks may be PuTTY too thick or interval time is short, PuTTY is not dry, this old house renovation time wall top leveling occurs more in construction.